MAGMA - SERVICES OFFERED:                SOIL TESTS     AGGREGATES TESTS     CONCRETE TESTS     MASONRY TESTS     CEMENT TESTS      BITUMEN & ASPHALT      WATER TESTS      CHEMICAL TESTS      PVC TESTS      STEEL TESTING      GEOTECHNICAL ENGINEERING      FIELD LABORATORY TESTING      CONSTRUCTION MATERIAL QA/QC MONITORING & INSPECTION      PROVIDING ALL KINDS OF QA/QC TRAINING      CALIBRATION
Cell Phone No.       0796 14 03 03   -    0787 91 69 40   -    0786 14 82 14    -    Email: info@magmageolab.com
 

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 
 
  Product List for Concrete Lab ¬
 
 
 
Picture/Model
Factory Technical Data
 

Concrete strength compression testing machine
Function:The products series is used for the compressive strength test of building materials such as
Concrete, cement, airbrick, fire proofing tile, engineering ceramics and building stone in the laboratory of road, bridge and construction ,
The product series is very popular with our customers at home and abroad, because it the cheapest and simplest testing machine in China.

 

Concrete strength compression testing machine
Function:
The products series is used for the compressive strength test of building materials such as Concrete, cement, airbrick, fire proofing tile, engineering ceramics and building stone in the laboratory of road, bridge and construction ,
The product series is very popular with our customers at home and abroad, because it the cheapest and simplest testing machine in China.
main technical data:
Max.Load Capacity: 2000Kn Testing range:, 0-2000Kn,
Loading accuracy: <±1% Max Compression test space::0-500,
Size of upper and lower compression plate: 204*204mm
Adjusting speed for test space :≥150mmPiston lift height: 10cm
Net Weight: 800Kg Gross: 1000Kg
Main Body: 1200*620*1000 Dimension: 1400*1160*650mm

 

600Kn Universal Testing Machine
Application
WAW series universal testing machine has the oil cylinder of underneath type and of microcomputer control, electro hydraulic servo. It has the advantages such as high precision, easy to operate, stable and reliable working and steady loading. It is suitable for doing testing experiments such as the tensile, compression, bending and shear test for all kinds of metal materials and nonmetal materials such as plastic, concrete, cement and so on. The whole machine is clean and elegant , simple and high efficiency .

 

Applications:
This machine used to do tension test of steel stranded wire, it can used to perform tension, compression, bend, shear test of metal and non-metal material. Oil cylinder of machine is underneath type, can free adjust testing room, automatic hydraulic clamp system, four column of main frame structure can be adjustable. Use import high quality electronic parts and components for production. Windows platform software. It has the feature such as automatic calibrate load, distortion, automatic switch measuring range, automatic stock test condition, test result, automatic count Fm, ReL, ReH, RP0.2, RP0.05, Rm and elastic modulus E et.. It has the function of dynamic display test data and curve when test, data edition, browse test curve, magnification, superposition, comparison et., can print complete test report and test curve.
Specifications:
Max. testing power: 1000KN,
Testing range: 0-1000KN,
Error:<±1%
Max. tension distance:1000mm
Piston distance:250mm
Working voltage:AC380V
Power of oil pump motor:2.0KW,1.5KW

 

1. Function:
The products series is used for tension, compression, bending and shearing test of metallic
And non-metallic materials, by adopting Microprocess digital device, the machine can perform
To display loading value, field value, print and so on , The machine has the oil cylinder of underneath type and of microcomputer constant loading control, electro hydraulic servo,
Standard:
It accords with the relative requirements of ISO, ASTM, JIN, GB and many other testing methods. EN10002-1, ISO 6892, ASTM E8, ASTM C39, ASTM F606, SAE J429, CE Compliant

 

Universal Testing Machine
1. Function:
The products series is used for tension, compression, bending and shearing test of metallic
And non-metallic materials, by adopting Microprocess digital device, the machine can perform
To display loading value, field value, print and so on , The machine has the oil cylinder of underneath type and of microcomputer constant loading control, electro hydraulic servo,
Standard:
It accords with the relative requirements of ISO, ASTM, JIN, GB and many other testing methods. EN10002-1, ISO 6892, ASTM E8, ASTM C39, ASTM F606, SAE J429, CE Compliant

 

Error:<±1%

 

Piston distance:250mm

 

Concrete Horizontal Mixer (60L )
Main feature:
1. capacity : about 60L , Enough to use in lab
2. sturdy steel mixing axis, rational design for high quality specimen t o perform all kinds of strength test.
3. Sliding wheel for easy displacement.
4. Digital display device showing mixing time and times of mixing situations
5. Supplied with base pan ,

 

Concrete Mixer (Vertical style , lab use )
General Description:
Pan style Concrete Mixer are suitable for the mixing of small quantities of concrete , which are generally used in lab ,
Specification:
Cap: 30L, Max, grain size: 40mm Mixing speed: 34-35minutes
It takes less than 1 minuttes to get concrete mixture in pan mixing method,
Distance e between blade and drum wall is less than 2mm

 

Portable Concrete Mixer 100L Cap
(Drum style , Field use Version)
Main technical data:
Tank capacity : 140L, Output capacity : 100L, Power : 1Hp
Packing information :
Overall dimension (mm) : 1300×950×1300
Weight Approx : 70kg

 

Portable Concrete Mixer 100L Cap
(Drum style , Field use Version)
Main technical data:
Tank capacity : 140L, Output capacity : 100L, Power : 1Hp
Packing information :
Overall dimension (mm) : 1300×950×1300
Weight Approx : 70kg

 

Cylinder Capping Machine
Applications:
an advanced core filling-in machine in current market,The model is used widely in central labs in construction, highway, airport and some engineering projects ,
The model have some features like simple and compact structure, small size and portable , Make specimen clean , flat , accurate vertical effect after filling-in specimen, have been popular among our current customs at home and abroad,
Specification:
Max. Dia of Capping Specimen : ¢100mm ;
Moving way: by manual Vertical : ≤0.04mm

 
Portable core cutting machine
Specification:
Size of cutting specimen: ¢50, ¢70, ¢100, ¢150mm,
Max length of cutting specimen: 400mm;
Rating speed of main shaft : 2300r/min ;
Rated power : 3KW ; Voltage: 380V ;
Dia of saw blade: ¢400mm ; Net Weight: 95kg ;
Net Dimension: 900×450 ×830mm ;
 
Portable Concrete Specimen cutting Machine
Application:
Used to cut concrete and asphalt pavement specimen in lab use, the model , by rail-mounted Working way, by rotating hand-wheel, to meet the level and accuracy of cutting quality,
Specifications:
1. Diameter of blade: Ø400mm .
2.Size of cutting sample : Ø50-150mm
3. Rotating speed : 2880 r/min 6. Rotated Power: 2.02KW
Shipping information :
Plywood case Delivered By sea way Packing weight: 180kg
 

Portable Concrete Specimen Grinding Machine
Specifications:
1. Diameter of grinding specimen: 50mm, 75mm, 100mm
2. Height of grinding specimen: 47.5-215mm
3. Griding wheel rotation: 3400rpm
4. Motor power: 1.7KW/2.6KW
5. Dimension: 550x420x700mm 6. Weight: 52kg/65kg、

 
Grinding Machine ( Double-blades model )
Applications
Its fit for produce all types of rocks and non-metallic solid concrete samples testing standards's essential equipment, It's fit with our company's automatic cutting machine together use, also can be processed into high- precision cube or cylinder specimen.
Specification:
◆Automatic grinding input: 0.04- 0.12mm
◆Grinding spec. Specimens: 50×50×50×50-150×150×150mm
◆Cylinder: φ50-φ120
◆Degree of finish (by standards of rough machining): Ra 3.2
◆The precision of standard flatness: ±0.05mm (within 50 range)
◆Diameter of the grinding wheel: 200mm
◆Cooling devices: receive water cooling.
Packing list: Dimension : 1400×1400×1300mm G.W: 900kg
 
Line Carving and Crack Cutter of Concrete pavement surface
Specifications:
Max.Depth of Line Carving: 5mm
Max.Width of Line Carving: 5 mm
Max.Depth of Crack Cutting :120 mm
Max.Width of Crack Cutting: 8 mm
Moving Speed :1-2m/min Net Size: 1150×800×950 mm
 
Concrete Crack Cutter Machine
Specifications:
Max.Depth of Crack Cutting (mm): 120
Width of Crack Cutting (mm): 3-5
Speed of Crack Cutting (m/min) :1.2
Motor Power (Kv): 5.5
 
concrete Vibration Equipment
Function:The Vibrating Table is used for compacting concrete cubes and cylinders.
Main Technical Parameter:
Area of table:1m²; Vibrating speed:2860 times/min Amplitude:0.3~0.6mm power:220V 1.1KW Max load:250kg
 
Electromagnet Vibrating table
Mainly used for forming concrete laboratory specimens. Meet JG / T 245-2009 standard of Building Industry.
Main technical data:
Table size (800 × 600) mm ;
Vibration frequency: 2860times/min;
Vibrating amplitude: 0.3-0.6mm
Supply voltage AC380V 50Hz
 
Concrete Air Content Meter (imitated from Japan)
Application:
used to determine air content in concrete mixture. The proper control of entrained air in concrete is recognized as one of the most important functions in modern concrete manufacture.
Specifications:
1. 7 liter capacity; 2. Aggregate size: 40mm maximum;
3. Readings: Up to 10% entrained air;
4. Pressure gauge in shock-proof mounting;
5. Pressure chamber is hermetically sealed by means fo four quick-release clamps.
Packing information: Dimension: 370x370x550mm, Weight: 25kg
 
LA-316 Diect Reading Air Concrete Meter
Standard
《Test Method of Performace of Normal Concrete Mixture 》GB/T50080-2002
《Technical Regulations of Additive of Normal Concrete Mixuture 》 GB/50119-2003
《COncrete Additive》GB/8076-1997
《Test regulations of water Project of Concrete mixture 》KI /t5144-2001《Test Regulations of Cement and Concrete Mixture 》GTJ/053-94
Specification:
Cap:7l Air rang:0—10%。
Precision: rang : 0%—6% ; Precision : ±0.1% ,
rang : 6%---10%(±0.2%)
Weight:10kg
 
Digit Concrete Vebe Consistometer
Suitable Standards: BS EN 12350; ASTM C 1170; AS1012
Application:
Used to test consistency of fresh concrete with low and lower consistency , working principles is to test consistency of concrete by mechanical vibration methods , the product must meet concrete mixture with less 40mm grain size , Vibrating time between 5-30S .
Comprises:
Vibrating table Slump cone
Graduated rod with transparent plate, Filling cone and tamping rod.
 

Longitudinal Compressometer
Suitable Standards:
Meet GB11971-89, GB81-85, JGJ053-94, ASTMC-469。
Performance:
This is for determining the lateral extension of cement concrete cylinders while testing them under compression.
Main technical data:
1.specimen size: 150×150×300mm,φ150×300mm,100×100×300mm,φ100×300mm,
2. clock gauge: 0-1mm
3. center distance between up and down metal rings : 150mm
4. distance from down ring to basement: 75mm

 

Setting-time by Penetration method (mortar )
Function:
It's used to determine the setting time of fresh concrete by means of penetrations resistance measurements on mortar.
Comprises:
1. test frame base-plate, frame supporting with strength value
2. specimen cylinders 3. penetrating needle sets
4. load device 5. lift device

 
Pavement Penetration Test
Function:
It's used to determine the setting time of concrete by means of penetrations resistance easurements on mortar.
Specification:
1. Penetration needle: 100mm2, 50 mm2, 20 mm2
2. Max penetration force:1000N, resolution:1N 3Voltage: AC220V
Features:
electrical lifting, digital display, peak value automatically saved
 

Vibrating Poker
An increasing number of contractual obligations call for various forms of vibro-compacted concrete for achieving a better and more consistent mixture. The Needle Vibrator is recommended for vibro-compaction of test cylinders and beams at site and in the laboratory. This instrument can also be used at small construction sites.
Diameter of Vibrating head: 35mm, flexible shaft : 4m

 
Pressure Bleeding Device
Description:
This apparatus used for doing pressure weepage test of concrete which particle size no more than 40mm.
Specifications:
1. Max. range of pressure meter: 6Mpa
2. Division value: no high than 0.1Mpa
3. Inside diameter of cylinder: 125。タ0.2mm
4. Inside diameter: 200。タ0.2mm
5. Pressure of working piston: 3.2Mpa
6. Nominal diameter: 125mm 7. Aperture size: 0.315mm
 
Dry and Wet Meter
Specifications:
1. Dial gauge: 1mm/0.001mm
2. Measuring rod length: 540±0.2mm
 
Slump Cone sets
Suitable Standard:
EN12350-2, ASTM C143, AASHTO T119 Standard。
Salient Features
The Apparatus consists of one slump cone with handles and foot pieces. The slump cone has internal dimensions 20cm. dia at base 10cm. top dia. and 30cm height. One graduated steel rod 16mm dia x 600mm long, rounded at one end and graduated in mms, is also supplied.
Notes: you can buy them separatly.
 
Digit Display Concrete Anchor Tensionmeter
Rated pressure of hand pump: 200KN
Rated tensile force of cavity jack:200KN
Max. piston stroke:100mm
Min. resolution:0.1KN
Feature:Features: digit display, automatically save peak value
 

Cement paste consistmeter

steel material to do corrsion treatment

 
Concrete Impermeability Apparatus
Application
The impermeability of the concrete is the capacity of the concrete which can prevent the water or other liquid medium (such as light-oil and heavy-oil) permeating under the pression.
The concrete impermeability apparatus is suitable for testing the impermeability of the concrete.
Packing List:
1. Main frame: 1 unit 2. Controller: 1 unit
3. Accessories:
1) Inner hexagon spanner: 1 set 2) O-type seal ring: 6 pieces
4. Technical documents:
1) Operation manual: 1 piece 2) Certificate: 1 piece
 
Concrete Impermeability Apparatus
Application
The impermeability of the concrete is the capacity of the concrete which can prevent the water or other liquid medium (such as light-oil and heavy-oil) permeating under the pression.
The concrete impermeability apparatus is suitable for testing the impermeability of the concrete.
Specification:
1. Working pressure:4Mpa; 2. Automatic pressure stabilization;
3. 6 pieces specimens accepted for one test;
4. Voltage:AC220V5. Single-chip control, with water autoregulation device.
 
Flame Photometer
The flame Photometer adopts digital display circuits to make meansurement results clearly shown with reliable readings, the instrument can not only satisfy medical clinical testing requirements but also be suited for the meansurement of K and Na in agriculture and industry, the model has the function to examine the Li Salt taken by metal disordered patients,
The model with standard configuration is fueled by liquidized petroleum gas, in Case No. 120 solvent is used , a gasoline vaorizing cylinder manufactured by our company shall be used .
 
concrete test hammer
By reading this rebound impact on a scale and relating it to curves on graphs supplied with the instrument, the resistance to compression in MPa or PSI can be found, with 20% of actual.
 
Multifunction Concrete Hollow Boring Machine
Standard:
The machine suitable to Standard:GB11818-89 Concrete core Drilling Machine technical required and EN-12504
Specifications:
1.Max. diameter of core: Ø150mm 2.Max. drilling depth: 350mm
3. Direction of cutting (grinding ): vertical 4. Way of enter: Manual
5. Motor's power: 2KW (2.68hp) 6. voltage: AC220V
 
triangular drill tower
 
Electrical Sand Tester
Application: Detection macro-roughness and sliding resistance property of road surface.
1. sand funnel capacity: about70 mm
2. sand funnel bottom opening width 2.7 mm
3. Sanding belt size: 50 mm
4. Moving speed of the sand funnel: about 1 mm/second
5. Moving range of the sand funnel: about 290 mm
6. Outer dimension: 470×160×140 mm
7. Motor Power: 12V, 3.3A
 
Adhesive Strength Tester
specification :
1. Max. tensile value: 10 KN; 2. Piston stroke: 10 mm;
3. Weight: 3 kg; 4. Precision: 1.0 F.S;
5. Power supply: Chargeable battery;
6. Working current: less than 10 mA;
7. Cutting off current: less than 2 μA;
   
Static Penetration Test
Application: This machine is used to perform static penetration test, and vane test together with four-bladed vane shear testing apparatus. It's convenient in data exchange. The machine is light, easy to operate, with simple structure and stable performance. No need to be connected to external power.
1. Penetration capacity: 20-30KN
2. Penetration speed: 0.8-1.2m/min
3. Winding speed: 4-5m/min 4. Diameter of probe rod: 25-28mm
5. Adapt probe: 10cm2
6. Four-bladed vane probe size: 50X100mm(separately equiped)
7. Weight of total machine: 180kg
 
Steel corrsion tester
Main technical specification 1. Measurement potential: ±999 mV; 2. Measurement accuracy: ±1 mV;
3. Measurement point interval: 1 to 100 cm;
4. Data storage: data at 5400 pieces of measurement zone/11000 pieces of measurement points;
5. Measurement area: 8100 m2;
6. Working environment:
(1) Ambient temperature: 0℃~+40℃; (2) Relative humidity: <90% RH;
(3) Electromagnetic interference: Please keep it away from any electromagnetic interference.
7. Power supply: By 6 pieces of No.5 LR6 (Alkaline) batteries; It can be used for more than 30 hours;
8. Resolution of LCD: 160 × 128;
9. Size and weight:
(1) Main unit: 210 ×153 ×90mm; 880 g;
(2) Probe: φ30 ×180 mm; 100 g;
   
steel localtor
Main functions
1. To determine position and distribution of steel bar in the concrete reinforcement structures.
2. To estimate diameter of steel bar and thickness of protection layer.
3. To determine thickness of protection layer of steel bar (known diameter).
4. To determine thickness of protection layer under a side and show grid.
5. To determine thickness of protection layer under a line and show sectional diagram of steel bar.
6. Self-calibration of detector.
7. Store and browse test data 8. Data output.
 
 
Magma - Geotechnical Laboratory Services                    [ Login ]
 
 
Copyright © 2012 MAGMA Geotechnical Laboratory Services. All Rights Reserved